LINC-CUT® S 1530d
Plasma cutting system with an extraction table solution
MADE IN EUROPE
Air plasma cutting and marking on sheets up to 1500 x 3000 mm. The next level for your independence, responsiveness and creativity in everyday work with low operating costs.
Top Features LINC-CUT S 1530d:
- High quality plasma cutting system for mild steel and stainless steel
- Extraction table with a filter unit
- Cutting area 1.500 – 3.000
- Integrated positioning laser
- CAD Software for designing, digitizing and nesting
- suitable for smaller companies with limited space
- System package with FLEXCUT 125A or TOMAHAWK 1538, ACCUMOVE -Controller with software (e.g. nesting, database etc.) and machine body
- Ready to cut – within about 1 hour after delivery
- All components from one manufacturer
- 2 years warranty on the machine, 3 years warranty on the plasma power source FLEXCUT 125A
- etc.
Processes:
Mechanized plasma Cutting, Plasma Marking* , manual plasma cutting**
*with FLEXCUT 125 **with Tomahawk 1538
Product description plasma cutting system
The LINC-CUT S 1530d with water table cutting system is suitable for a range of plasma cutting applications and cuts steel from 1 up to 25 mm. The low operating costs are ensured by long service life of the wear parts, high cutting speeds and almost dross-free cuts. The cutting range is for sheet sizes from 1000 x 2000 up to 1500 x 3000 mm. The LINC-CUT is a modern, high quality system with small footprint for smaller workshops and convinces with impressive performance data. The LINC-CUT is built in EUROPE. All components integrated in the LINC-CUT are manufactured exclusively by LINCOLN ELECTRIC itself and are therefore perfectly matched to each other. No matter whether it is the ACCUMOVE control, the FLEXCUT 125A or TOMAHAWK 1538 and of course the machine body with linear bearings for the X, Y and Z axes, everything works hand in hand in a coordinated manner – for perfect results.
The LINC-CUT S 1530w comes standard with the FLEXCUT 125A air plasma power source and can penetrate and cut mild steel up to 25 mm thick. 10 mm mild steel, for example, it cuts at a speed of 2700 mm/min. The FLEXCUT 125A supports both plasma cutting and plasma marking with the same set of consumables.
Practice-oriented construction
The machine body with its rigid steel frame construction and the includes extraction table contributes significantly to the precise guidance of the cutting unit. The steel frame allows very smooth movements as well as excellent and constant positioning accuracy and at the same time forms the basic frame for the cutting table of the LINC-CUT. The extraction table is integrated and ready to be mounted to an additional filter unit. It catches the cutting dust and escaping residual gases. The steel frame construction safely supports sheets of 1500 – 3000 mm with a thickness of 25 mm.
The plug-and-play design of the LINC-CUT S 1530d system simplifies construction, installation and startup of the machine, which can be completed within a few hours after delivery. A minimal learning curve – thanks to the extremely user-friendly touch interface of the control – allows your operator to quickly get started with the production process. LINCOLN ELECTRIC offers the support of a single manufacturer and contact person in Europe, should the need arise during years of reliable production operation of a LINC-CUT S 1530d.
Technical data plasma cutting system
Machine specification LINC-CUT S 1530 d
- Input voltage: 230V, 1 phase, 50/60 Hz 4A
- Drive system: precision rack and pinion
- Linear transverse drive
- Integrated positioning laser
- Positioning speed: 12700 mm/min
- Cutting table specifications
- Cutting area 1.500 x 3.000 mm
- Extraction table
- Total height: 1.400mm
- Total length: 4,500 mm
- Total width: 2.550 mm
- Weight: 1800 kg
Extraction table
- 5 segments , each 600 mm
- Filter unit
ACCUMOVE Controller
- Easy to operate machine control
- HMI designed as touch screen interface for intuitive operation
- Integrated process management with material selection and thickness
- Sheet orientation compensated
- Laser Position Mode
- 36 Integrated standard shapes
- Automatic nesting module
- Processes DXF or DWG files
FLEXCUT 125 A
- Cutting current 20-125 Amp
- Input current: 400 V 3 phases 40A
- Rated power output: 125Aat 100% duty cycle
- Cutting gas: air
- Dimensions: 526 x 311 x 648 mm
- Weight: 53,5 kg
TOMAHAWK® 1538
- Air Plasma cutting
- Provide with 2 torches LC100M for mechanized cuts and LC105 for manual cuts
- Output range 20-100 Amp
- Input power: 400V (+/-15%) – three-phases – 50 – 60 Hz
- Input power: 7.1kW @ 100%, 13.7kW @ 40%, 32A fuse protection slow type
- Rated output: 60A/100% – 80A/65% – 100A/40% (40 °C)
- gas: Air
- Dimensions: 455 x 301 x 618 mm
- Weight: 36 kg
- 20mm piercing
- 25mm start from edge
Cutting data
wear parts / maintenance part plasma cutting system
FlexCut 125
Article number | Discription |
---|---|
K4300-4 | LC125M Machine-Plasma- Torch 7,5 m |
K4300-5 | LC125M Machine-Plasma- Torch 15 m |
K4300-6 | LC125M Machine-Plasma- Torch 22,5 m |
K4302-2 | LC125M Starter Kit wear parts |
BK14300-1 | ELECTRODE (45-125A), LC125M (5pcs-PACK) |
BK14300-3 | Protection cap (45-65A), LC125M (2pcs-PACK) |
BK14300-4 | Protection cap (85A-105A-125A), LC125M (2pcs-PACK) |
BK14300-7 | Nozzle (45A), LC125M (5pcs-PACK) |
BK14300-8 | Nozzle (65A), LC125M (5pcs-PACK) |
BK14300-9 | Nozzle (85A), LC125M (5pcs-PACK) |
BK14300-10 | Nozzle (105A), LC125M (5pcs-PACK) |
BK14300-11 | Nozzle (125A), LC125M (5pcs-PACK) |
BK14300-13 | SWIRL RING (45A-125A), LC125M (2pcs-PACK) |
BK14300-14 | RETAINING CAP (45A-125A), LC125M (1pc-PK) |
BK14300-15 | RETAINING CAP(45A-125A) CTP,LC125M (1PK) |
TOMAHAWK 1538
Article number | Discription |
---|---|
BK12849-25 | LC100M TORCH LEAD 25′ W/TORCH (LOADED) |
BK12849-50 | LC100M TORCH LEAD 50′ W/TORCH (LOADED) |
BK12849-22 | RET CAP, CONTACT-CTP (LC100M) |
BK12849-9 | SWIRL RING (LC100M/LC105M) (2PK) |
BK12849-3 | ELECTRODE (LC100M) (5PK) |
BK12849-18 | SHIELD CAP, PRECISION CUT (LC100M) (2PK) |
BK12849-14 | SHIELD CAP, 40A (LC100M) (2PK) |
BK12849-15 | SHIELD CAP, 60A-80A (LC100M) (2PK) |
BK12849-11 | NOZZLE, PRECISION CUT C (LC100M/LC105M) (5PK) |
BK12849-4 | NOZZLE, 40A (LC100M/LC105M) (5PK) |
BK12849-5 | NOZZLE, 60A (LC100M/LC105M) (5PK) |
BK12849-6 | NOZZLE, 80A (LC100M/LC105M) (5PK) |