Flexcut 125A Air plasma power source for cutting and marking
TOMAHAWK 1538
Manual Plasma cutting with TOMAHAWK 1538 possible
LIN-CUT S 1530w, side view with accumove
CNC Plasma cutting table LINC-CUT®S 1020w & 1530w compact and cost effective with water table technology.
MADE IN EUROPE
Air CNC Plasma cutting andmarking on metalsheets from 1000 x 2000mm to 1500 x 3000 mm. The next level for your independence, responsiveness and creativity in everyday work with low operating costs.
Top Features LINC-CUT® S Plasma cutting table:
High quality CNC Plasma cutting system for mild steel and stainless steel
Compact unit with water-filled cutting table
Cutting area 1.000 x 2000 or 1.500 x 3.000
Integrated positioning laser
CAD Software for designing, digitizing and nesting
suitable for smaller companies with limited space
System package with FLEXCUT 125A or TOMAHAWK 1538, ACCUMOVE-Controller with software (e.g. nesting, database etc.) and machine body
Ready to cut – within about 1 hour after delivery
All components from one manufacturer
2 years warranty on the machine, 3 years warranty on the plasma power source
The LINC-CUT S with water table cutting system is suitable for a range of plasma cutting applications and cuts steel from 1 up to 25 mm. The low operating costs are ensured by long service life of the wear parts, high cutting speeds and almost dross-free cuts. The cutting range is for sheet sizes from 1000 x 2000 up to 1500 x 3000 mm. The LINC-CUT is a modern, high quality system with small footprint for smaller workshops and convinces with impressive performance data. The LINC-CUT is built in EUROPE. All components integrated in the LINC-CUT are manufactured exclusively by LINCOLN ELECTRIC itself and are therefore perfectly matched to each other. No matter whether it is the ACCUMOVE control, the FLEXCUT 125A orTOMAHAWK 1538 and of course the machine body with linear bearings for the X, Y and Z axes, everything works hand in hand in a coordinated manner – for perfect results.
The LINC-CUT S 1530w comes standard with the FLEXCUT 125orTOMAHAWK 1538 air plasma powers sources. Flexcut 125 can penetrate and cut mild steel up to 25 mm thick. 10 mm mild steel, for example, it cuts at a speed of 2700 mm/min. The FLEXCUT 125A supports both plasma cutting and plasma marking with the same set of consumables. TOMAHAWK 1538 can pierce up to 20mm and is well adapted for thin and medium thicknesses. For example on 2mm it is possible to cut at speed close to 7m/min. With TOMAHAWK 1538 comes 2 plasma torches, one for mechanized cuts already mount on the machine, and another one for manual cuts for secondary operations like cutting plate scraps for example
Practice-oriented construction
The machine body with its rigid steel frame construction contributes significantly to the precise guidance of the cutting unit. The steel frame allows very smooth movements as well as excellent and constant positioning accuracy and at the same time forms the basic frame for the cutting table of the LINC-CUT. The cutting table is integrated in the carrier and is filled with water and a specific anti corrosion liquid. It catches the cutting dust and escaping residual gases. The steel frame construction safely supports sheets with a thickness of 20 mm. Smaller sheets can even be up to 25 mm thick.
The plug-and-play design of the LINC-CUT S water table system simplifies construction, installation and startup of the machine, which can be completed within a few hours after delivery. A minimal learning curve – thanks to the extremely user-friendly touch interface of the control – allows your operator to quickly get started with the production process. LINCOLN ELECTRIC offers the support of a single manufacturer and contact person in Europe, should the need arise during years of reliable production operation of a LINC-CUT S water table.
LINC-CUT 1020 & 1530 Plasma Cutting tables
